BVPHF - IBM 4019 TONER
- MSDS: BVPHF
- Manufacturer: STATIC CONTROL COMPONENTS
- Product Name: IBM 4019 TONER
- National Stock Number: 6850-00N053012
Product Identification
Product ID:IBM 4019 TONER
MSDS Date:05/10/1994
FSC:6850
NIIN:00N053012
MSDS Number: BVPHF
Responsible Party
SANFORD, NC 27330
US
Emergency Phone: 919-774-3803
Info Phone: 919-774-3803
Cage: 0GAA9
Contractor
Telephone: 919-774-3808
Cage: 0GAA9
Ingredients
STYRENE ACRYLIC POLYMER
CAS: 26655-10-7
Fraction By Weight: 83%
OSHA PEL N/K
ACGIH TLV: N/K
POLYPROPYLENE GLYCOL; (POLYPROPYLENE)
CAS: 25322-69-4
RTECS: TR5250000
Fraction By Weight: 7%
OSHA PEL N/K
ACGIH TLV: N/K
DYE
CAS: 84179-66-8
Fraction By Weight: 2%
OSHA PEL N/K
ACGIH TLV: N/K
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 7%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
SILICA
CAS: 68909-20-6
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:ORAL - GREATER THAN 10/KG.
MINIMAL RESPIRATORY TRACT IRRITATION MAY OCCUR AS WITH EXPOSURE TO
LARGE AMOUNTS OF ANY NON-TOXIC DUST. CHRONIC:NONE IN NORMAL
HANDLING/USE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:WILL NOT OCCUR.
First Aid
First Aid:INGEST:TAKE SEVERAL GLASSES OF WATER & SEEK MED TREATMENT.
INHAL:REMOVE TO FRESH AIR IF EFFECTS OCCUR. AID IN BREATHING IF
NECESSARY. GET MED ATTN. EYES:FLUSH THOROUGHLY WITH WATER FOR AT
LEAST 15 MIN UTES; IF UNSUCCESSFUL SEEK MED TREATMENT. SKIN:WASH
WITH SOAP & WATER.
Fire Fighting
Extinguishing Media:FOAM, WATER SPRAY (FOG), DRY CHEMICAL OR CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:TONER IS A COMBUSTIBLE POWDER. WHEN
DISPERSED IN AIR, IT FORMS AN EXPLOSIVE MIXTURE.
Accidental Release
Spill Release Procedures:IF MATERIAL IS RELEASED OR SPILLED:IF SPILLED,
SWEEP UP OR CLEAN UP WITH VACUUM CLEANER; REMOVE RESIDUE WITH SOAP
AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AND DARK PLACE.
DO NOT INCINERATE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQD UNDER NORMAL USE. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED UNDER NORMAL USE.
Protective Gloves:NONE REQUIRED UNDER NORMAL USE.
Eye Protection:NONE REQUIRED UNDER NORMAL USE.
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE.
Work Hygienic Practices:MINIMIZE BRTHG DUST. CLEAN SKIN THORO AFTER
CONTACT, BEFORE BREAKS AND MEALS & AT END OF WORK PERIOD.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.2 (H*20=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE, ODORLESS BLACK POWDER
Stability
Stability Indicator/Materials to Avoid:YES
NONE FOR PURPOSES OF TRANSPORT, HANDLING AND STORAGE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:COMPLY WITH ALL FEDERAL, STATE, AND LOCAL
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.